Automotive Diagnostic Softare

How to Read and Clone BMW B38 ECU with AT200

dave1987 | 28 November, 2019 06:24

 

AT-200 ecu programmer & ISN code reader supports over 1280 ECUs, including BMW MSV90,MSVD85, MSVD85.1,MSVD85.2, MSVD87, MSVD87.2, N13, N55, N20, B38,B48 etc.
Here’s the guide to read and write B38 ISN using AT-200 on bench.
1) Read ISN
2) Modify ISN
3) Module cloning
at-200-clone-bmw-b38-isn-1
In AT-200 software, select BMW model and Engine ECU type
i.e Select BMW 1 series 116i B38815A 109 Bosch MEVD17.2.K TC1793
Choose Bench mode
at-200-clone-bmw-b38-isn-2
Check wiring diagram
at-200-clone-bmw-b38-isn-3
Connect ECU with AT200 via tuning adapter follow the wiring (adapter comes with the at200 programmer)
at-200-clone-bmw-b38-isn-4

at-200-clone-bmw-b38-isn-5
Identify ECU type
at-200-clone-bmw-b38-isn-6
Press Read ISN
at-200-clone-bmw-b38-isn-7
Read ISN successfully
Select Write ISN
at-200-clone-bmw-b38-isn-8
Manually enter new ISN value and press OK to continue
at-200-clone-bmw-b38-isn-9
Write ISN successfully
at-200-clone-bmw-b38-isn-10
at-200-clone-bmw-b38-isn-11
Module cloning (clone ECU)
Press Read Dflash 
at-200-clone-bmw-b38-isn-12
Save Dflash data
Select Read Pflash
at-200-clone-bmw-b38-isn-13
at-200-clone-bmw-b38-isn-14
Reading  pflash in process
at-200-clone-bmw-b38-isn-15
Save Pflash.
Check AT200 ECU list 
http://blog.obdii365.com/2019/11/28/at-200-read-and-write-bmw-b38-isn-on-bench/

 

Comments

Add comment

 This is the ReCaptcha Plugin for Lifetype

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6