Automotive Diagnostic Softare

Isuzu E-IDSS G-IDSS 2018 Software Installation

dave1987 | 17 October, 2019 07:29

Here's the guide to install G-IDSS E-IDSS Global Diagnostic services System (E-IDSS ) 2018 software for Isuzu vehicles. 

E-IDSS 2018 can be used to perfectly diagnose including Euro IV, Euro 5 DPF regeneration function, injector code, write VIN, diesel pump Functions such as adjustment functions  e-idss is software USB-LINK Special Edition is hardware. It can only test the Isuzu engine sensor, adblue and DPF of the Denso ECU/ECM.

Step 1. If your Isuzu diagnostic system S/N starts with V11, software must be installed on one laptop only. Cannot change another laptop.

install-isuzu-idss--1

Open E-IDSS
Enter serial number
Enable network connection
Accept license agreement
Press Yes to activate IDSS software


Step 2. 

Install G-IDSS

Open software CD

Open IDSS2018CD1 folder and install setup

Don't extract data3.cab and data4.cab

Ignore all error prompts



Install E-IDSS

Directly run E-IDSS and a shortcut will appear on desktop



Step 3.Install USB driver
install-isuzu-idss--2

Run USB Driver.exe

Restart computer when driver installation finished

Don't connect IDSS--USB device when installing driver




Step 4. Press Activation button 
install-isuzu-idss--3

the procedure takes 2 minutes



Step 5. Press Start button to start program
install-isuzu-idss--4

Step 6. Select Device
install-isuzu-idss--5

Step 7. for example, select device as "NEXIQ Technologies USB-LINK over USB"
install-isuzu-idss--6

Step 8. 

If failed to connect with nexiq, click on the reflash icon to reconnect. 
install-isuzu-idss--7

If system cannot identify driver 2.500134, test driver or check if IDSS USB device is well connected with laptop. 
Done.

 

Comments

Add comment

 This is the ReCaptcha Plugin for Lifetype

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6