Automotive Diagnostic Softare

OBDSTAR Read Pin Code for Chevrolet Lacetti 2014

dave1987 | 10 June, 2019 05:16

As titled,  here's the guide to read pin code and program smart key on a Chevrolet Lacetti 2014 (Daewoo Lacetti 2014) by OBDSTAR X300 DP PLUS via OBD.

obdstar-x300-dp-plus-2014-lacetti-1

Step 1: Read Pin Code
Connect X300 DP with vehicle via OBD
Select Diag Program->Immobilizer->GM->GM V31.30->Read Pin Code->By OBDII->By Other System->Read PinCode->Chevrolet->Cruze->2014
obdstar-x300-dp-plus-2014-lacetti-2

obdstar-x300-dp-plus-2014-lacetti-3

obdstar-x300-dp-plus-2014-lacetti-4

obdstar-x300-dp-plus-2014-lacetti-5

obdstar-x300-dp-plus-2014-lacetti-6

obdstar-x300-dp-plus-2014-lacetti-7

obdstar-x300-dp-plus-2014-lacetti-8

obdstar-x300-dp-plus-2014-lacetti-9








Turn on ignition switch
Communicating
obdstar-x300-dp-plus-2014-lacetti-9

Read 4-digit Pin Code success


Step 2: Program smart key
In X300 DP PLUS GM menu, select Immobilizer->Select from vehicle-> Chevrolet->Cruze->2009-2014->With Smart->All smart keys lost
obdstar-x300-dp-plus-2014-lacetti-10

obdstar-x300-dp-plus-2014-lacetti-11

obdstar-x300-dp-plus-2014-lacetti-12

obdstar-x300-dp-plus-2014-lacetti-13

obdstar-x300-dp-plus-2014-lacetti-14





Press Start button
obdstar-x300-dp-plus-2014-lacetti-15

Put the smart key into the card slot (here below the cup holder). Take other smart keys out of car.
obdstar-x300-dp-plus-2014-lacetti-16

OBDSTAR X300 DP PLUS require to enter 4-digit pin code to access
obdstar-x300-dp-plus-2014-lacetti-17

Enter Pin read in Step 1 and confirm
Configuring system, wait for 12 minutes
obdstar-x300-dp-plus-2014-lacetti-18

Press the Start button once
Press ENTER to program next smart key
obdstar-x300-dp-plus-2014-lacetti-19

Press Start button for 12s
obdstar-x300-dp-plus-2014-lacetti-20

Release Start button and wait for 5s, press ENTER to continue
obdstar-x300-dp-plus-2014-lacetti-21

Press Start button to turn on ignition
Turn ignition off. Wait for 60s to reset the adaptive values
obdstar-x300-dp-plus-2014-lacetti-22

Press Start button to turn off ignition.
Configuring the system, wait for 30s
obdstar-x300-dp-plus-2014-lacetti-23

Press the brake pedal, press Start button to start engine and wait for 5s, press ENTER to continue
Stop engine
Press Start button to turn off ignition
obdstar-x300-dp-plus-2014-lacetti-24

Remove smart key, press LOCK and UNLOCK button
obdstar-x300-dp-plus-2014-lacetti-25

Program completed.
Remote control will automatically programmed
obdstar-x300-dp-plus-2014-lacetti-26

Test remote control and start vehicle.
Done.

http://www.key-programmer.org/2019/06/10/program-lacetti-2014-smart-key-with-obdstar-x300-dp-plus/

 

Comments

Add comment

 This is the ReCaptcha Plugin for Lifetype

 
Provided by Multiblog.net - easy blogging platform
P0wered by L1fe7ype - De51gn by Ba1earWe6